Network-M3のファームウェア 2.1.3 が公開されました。
バージョンアップを実施すると、ネットワークカードは再起動しますが、UPS本体は出力を停止することなく稼働し続けます。
以下、Eaton発行のリリースノート（原文）
==========================================================================================
Firmware release notes for Eaton Gigabit Network Card for UPS (Network-M3, P/N 744-A4920)
Firmware : Release 2.1.3
Date : 2024/11/05
Eaton (c) 2024
==========================================================================================
===============================
Release 2.1.3 November 2024
===============================
Software compatibility: IPP 1.61 and higher, IPM 1.61 and higher, VPM 6.4.0 and higher
Supported UPS: Eaton 5P, 5PX, 5SC Rack, 9PX, 9PXM, 9SX, 9130, FERRUPS FX, 9E, 93PS (fw 2.50->), 91PS, 93E 15-80 EMEA (fw 8.00.01->), 93E G2 EMEA (fw 4.0.20->)
Supported ATS: Eaton EATS115, EATS16, EATS120, EATS220
New Features and Performance:
- Addressed an issue causing 100% CPU usage.
- Improved performance for power distribution commands.
- Fixed issues with LDAP profile mapping and user session management.
- Enabled ZTP (Zero Touch Provisioning) through DHCP.
- Enabled HCI cluster shutdown for VxRail support.
- Improved CDS access optimizations for better system efficiency.
- Added support for IPP/IPM quick scan functionality.
- Implemented validation tests auto stabilization for system reliability.
- Optimized port handling for Amazon FTDI serial devices.
- Customizable configuration file URLs per product for ZTP.
- Enabled MIB selection for sending traps.
User Interface:
- Fixed overlapping UI labels and icons for specific languages.
- Corrected the display of sensor offset and measurement logs.
- Improved alignment and responsiveness of various UI elements.
- Resolved an issue with the display of temperature values from EMPs.
- Fixed pop-up behavior for multiple UI elements, including legal information and syslog buttons.
Security Enhancements:
- Updated to remove weak ciphers considered insecure.
- Implemented secure boot with SSBL rollback prevention.
- Enhanced cybersecurity for U-Boot (second steps).
- Corrected an issue with SNMPv3 authentication and privacy not working as expected.
- Fixed secure storage provisioning requirements for SRR support.
Bug Fixes:
- Fixed issue where static network settings were changed to DHCP
- Fixed an issue where Syslog status icons were not fully displayed in the table.
- Corrected a problem where the battery test always showed success, even when it failed.
- Resolved an issue where the main page could not display input power values, showing only '-'.
- Fixed the wrong color display in the battery box.
- Addressed sensor connection problems.
- Fixed a problem where Modbus registers coded were unavailable.
- Corrected Modbus register mappings to reflect correct units.
- Fixed an issue where SNMP alarms for 9395P were missing in UPS-MIB and XUPS-MIB.
- Improved Modbus register mappings for correct inverter output failure representation.
- Fixed Modbus mappings in UID 245, ensuring accurate readings and semicolon placements in files.
- Addressed a bug where system logs could not be downloaded via the UI.
- Resolved issues with account preferences for language and date format not initializing properly.
- Fixed UI responsiveness issues for certain UPS settings.
- Corrected an issue with SNMPv3 traps not displaying status properly.
- Fixed an issue where UPS firmware upgrades continued despite UPS errors.
- Corrected an issue where sensor communication statuses were not refreshed.
- Resolved an issue where certificates were regenerated unexpectedly after network configuration changes.
Network-M3 ファームウェアアップグレード手順
https://www.eaton-daitron.jp/techblog/14392.html
