Network-M2のファームウェア 2.0.5 が公開されました。
重要：GUIがアップデートされております。
バージョンアップを実施すると、ネットワークカードは再起動しますが、UPS本体は出力を停止することなく稼働し続けます。
以下、Eaton発行のリリースノート（原文）
==========================================================================================
Firmware release notes for Eaton Gigabit Network Card for UPS (Network-M2, P/N 744-A3983)
Firmware : Release 2.0.5
Date : 2020/11/05
Eaton (c) 2020
==========================================================================================
Upgrade/Compatibility:
This section describes the considerations for upgrading from a previous release.
Note that upgrading to 2.0.x from any previous firmware revision will clear all alarms and events from the user interface.
A backup of these alarms and events is available through RESTful API.
See https://www.eaton.com/network-m2 for detailed RESTful API documentation.
2.0.5 is only compatible with the Eaton Gigabit Network Card (Network-M2, P/N 744-A3983).
Earlier versions can be upgraded to 2.0.5 according to the procedure described in the manual.
Downgrade from 1.6.x or above to 1.5.x or below is not possible. Beyond this limitation,
downgrade to earlier versions is possible but not recommended.
===============================
Release 2.0.5 November 2020
===============================
Software compatibility: IPP 1.61 and higher, IPM 1.61 and higher
Supported UPS: Eaton 5P, 5PX, 5SC Rack, 9PX, 9PXM, 9SX, 9130
* 3 phase UPS are not supported for this release
Supported ATS: Eaton EATS115, EATS16, EATS120, EATS220
Additions:
- Alarms will auto clear when there are more than 6000 alarms
- Ats2 SNMP MIB
- Russian language support
- Support for 9130 and EATS models
Changes:
- Updated user interface
- IE11 is no longer supported
- Updated RESTful API for power distribution service
- Added option to hide IP address from email body
- Set Common Name (CN) to be the FQDN for webserver, syslog and mqtt certificates
- Removed "Web server" prefix and -selfsigned suffix from CN
- CN and SAN are now the same
- Limitation of 20 IPP connected agents
Fixes:
- Improvements to IETF and XUPS SNMP MIB
- Resolved issue with forced reboot on 9PX/9SX
- Allow special characters in LDAP configuration
- Removed trailing "." from FQDN when no domain name is set
- Resolved issue with email service periodic reports.
Network-M2 ファームウェアアップグレード手順
https://www.eaton-daitron.jp/techblog/8108.html
